fbpx
  • We are introducing you to the latest piece of work built by Dixer Parts from Poland. This is the BMW K100 RS from 1990. Our main mission is production of motorcycle parts, which is why we used many of our bestsellers for this project. https://www.youtube.com/watch?v=qQPKoP74ZsU The main goal was to create a motorcycle that will delight with minimalism. We wanted to create some empty spaces under the seat and above the engine. This was achieved thanks to the use of a lithium-ion battery (which was hidden under the rear fairing) and thanks to the Motogadget M-unit blue controller, which eliminated lots of unnecessary electrical installation. It was pure pleasure for us to work with this model. We've encountered many interesting situations that will be mentioned on our Instagram and Facebook profile. One of them was the purchase of a set of two police BMW R850 RT just to achieve spoked wheels that are difficult to access separately. In the project "ZERO" we've used a few cool solutions that cannot be seen with the naked eye, e.g. on each varnished element there is an aluminum, brushed foil. The rear fairing was made on a 3D printer and the ignition can be turned on via Bluetooth on a specially configured Motogadget smartphone application. The assembly of the USD front suspension in this type of projects is starting to become a standard. Our K100 received lags from Suzuki GSX-R 1000 K7 (beautiful black pipes). We’ve made the lower and top triple along with the stem ourselves – this is what we love to do the most. As you probably noticed, they are inverted, which means that the nut is at the bottom. Thanks to this we have obtained a smooth top triple. We unanimously decided that we will borrow the headlight along with its roof from the Harley Davidson XL 1200 Sportster. It was mounted on the upper yoke, so that we wouldn’t litter the lags with an additional handle. The turn signals in the handlebar were produced by Motogadget, while the rear LED lamp was placed  in a fairing that was made using 3D-printing technology. Thanks to this, it was possible to perfectly fit the battery inside it. In addition to the ability of charging the battery without disassembling any parts, we also have a hidden USB charger, so that it is possible to start the motorcycle when the driver is using the "keyless" function and his phone’s battery has run out. Our K100 appeared in the MOTOCYKL journal (7/2020) and on portals such as: BIKE EXIF: https://www.bikeexif.com/custom-bikes-week-185 PIPEBURN: https://www.pipeburn.com/zero-to-hero-bmw-k100-by-dixer-parts/ MOTOGEN: https://motogen.pl/bmw-k100-rs-zero-by-dixer-parts/ MOTOBANDA: https://motobanda.pl/prosto-z-polski-motycle-bmw-k100-rs-zero-by-dixer-parts It has been named as the most beautiful K100 ever made in the comments. VID : https://www.youtube.com/watch?v=qQPKoP74ZsU TECHNICAL DATA: Model: BMW K100 RS Production year: 1990 Year of reconstruction: 2020 Tires: BRIDGESTONE AX41S SCRAMBLER Motogadget parts: - M-unit blue - Motoscope Pro speedometer - Mo.view mirror - Mo.grip handlebar - Mo. Blaze turn signals If interested, please contact us by email: dixerparts@gmail.com or call us: +48668419384 We personally deliver the motorcycle throughout Europe.
  • We are intoducing you to another 2012 Kawasaki ZX6R Ninja that has just been modified for stunt riding. We've used our best parts for the conversion, and it's also possible to change parts at the buyer's request, such as: a straight handlebar, a different rear sprocket size and a different type of HB bracket. Motorcycle registered in Poland. Lights, horn and speedometer work and you only need mirrors to ride legally. Motorcycle has not been used in stunt riding before and was rebuilt from a nice base (photos for viewing). What was done / installed: - 16/60t drive system + RK 520 XSO chain - complete handbrake system with a 17.4 mm Nissin radial brake caliper, steel braided brake line, two radial caliper brackets, 300 mm floating brake disc and Tokico calipers - clip-on handlebar with full adjustment - front steel frame - rear 12 o'clock scrape bar together with titanium for scraping - rear seat lined with abrasion resistant material and natural leather - modified engine lubrication and ecology - short clutch lever on bearing - a crash cage covering the engine and fairings with a 3-point mounting - subcage with aluminium pegs - front steel sets with aluminium pegs - front light tinted with foil - idle adjustment cable - changed Motul 5100 10W50 oil & filter - accessory turn signals, registration mounting - HP Corse sporting short exhaust - modified fuel tank and anti-slip mat - modified tilt sensor - all brake lines are steel braided (black) - ignition switch moved to the cage area - upper triple tree clamp with the possibility of mounting risers for a wide handlebar. The engine runs evenly and quietly. Price can be negotiated. Shipment possible. Phone number: +48668419384 Address: Łąka near Pszczyna in Silesia, Poland Please feel free to contact.
  • We are intoducing you to another 2010 Kawasaki ZX6R Ninja that has just been modified for stunt riding. We've used our best parts for the conversion, and it's also possible to change parts at the buyer's request, such as: a straight handlebar, a different rear sprocket size and a different type of HB bracket. Motorcycle registered in Poland. Lights, horn and speedometer work and you only need mirrors to ride legally. Motorcycle has not been used in stunt riding before and was rebuilt from a nice base (photos for viewing). What was done / installed: - 16/60t drive system + RK 520 XSO chain - complete handbrake system with a 17.4 mm Nissin radial brake caliper, steel braided brake line, two radial caliper brackets, 300 mm floating brake disc and Tokico calipers - clip-on handlebar with full adjustment - front steel frame - rear 12 o'clock scrape bar together with titanium for scraping - rear seat lined with abrasion resistant material and natural leather - modified engine lubrication and ecology - short clutch lever on bearing - a crash cage covering the engine and fairings with a 3-point mounting - subcage with aluminium pegs - front steel sets with aluminium pegs - front light tinted with foil - idle adjustment cable - changed Motul 5100 10W50 oil & filter - accessory turn signals, registration mounting - HP Corse sporting short exhaust - modified fuel tank and anti-slip mat - modified tilt sensor - all brake lines are steel braided (black) - ignition switch moved to the cage area - upper triple tree clamp with the possibility of mounting risers for a wide handlebar. The engine runs evenly and quietly. Price can be negotiated. Shipment possible. Phone number: +48668419384 Address: Łąka near Pszczyna in Silesia, Poland Please feel free to contact.
  • We are intoducing you to another 2010 Kawasaki ZX6R Ninja that has just been modified for stunt riding. We've used our best parts for the conversion, and it's also possible to change parts at the buyer's request, such as: a straight handlebar, a different rear sprocket size and a different type of HB bracket. Motorcycle registered in Poland. Lights, horn and speedometer work and you only need mirrors to ride legally. Motorcycle has not been used in stunt riding before and was rebuilt from a nice base (photos for viewing). What was done / installed: - 16/60t drive system + RK 520 XSO chain - complete handbrake system with a 17.4 mm Nissin radial brake caliper, steel braided brake line, two radial caliper brackets, 300 mm floating brake disc and Tokico calipers - clip-on handlebar with full adjustment - front steel frame - rear 12 o'clock scrape bar together with titanium for scraping - rear seat lined with abrasion resistant material and natural leather - modified engine lubrication and ecology - short clutch lever on bearing - a crash cage covering the engine and fairings with a 3-point mounting - subcage with aluminium pegs - front steel sets with aluminium pegs - front light tinted with foil - idle adjustment cable - changed Motul 5100 10W50 oil & filter - accessory turn signals, registration mounting - HP Corse sporting short exhaust - modified fuel tank and anti-slip mat - modified tilt sensor - all brake lines are steel braided (black) - ignition switch moved to the cage area - upper triple tree clamp with the possibility of mounting risers for a wide handlebar. The engine runs evenly and quietly. Price can be negotiated. Shipment possible. Phone number: +48668419384 Address: Łąka near Pszczyna in Silesia, Poland Please feel free to contact.
  • We are intoducing you to another 2010 Kawasaki ZX6R Ninja that has just been modified for stunt riding. We've used our best parts for the conversion, and it's also possible to change parts at the buyer's request, such as: a straight handlebar, a different rear sprocket size and a different type of HB bracket. Motorcycle registered in Poland. Mileage - 35216 km. Lights, horn and speedometer work and you only need mirrors to ride legally. Motorcycle has not been used in stunt riding before and was rebuilt from a nice base (photos for viewing). What was done / installed: - 16/60t drive system + RK 520 XSO chain - complete handbrake system with a 17.4 mm Nissin radial brake caliper, steel braided brake line, two radial caliper brackets, 300 mm floating brake disc and Tokico calipers - clip-on handlebar with full adjustment - front steel frame - rear 12 o'clock scrape bar together with titanium for scraping - rear seat lined with abrasion resistant material and natural leather - modified engine lubrication and ecology - short clutch lever on bearing - a crash cage covering the engine and fairings with a 3-point mounting - subcage with aluminium pegs - front steel sets with aluminium pegs - front light tinted with foil - idle adjustment cable - changed Motul 5100 10W50 oil & filter - accessory turn signals, registration mounting - HP Corse sporting short exhaust - modified fuel tank and anti-slip mat - modified tilt sensor - all brake lines are steel braided (black) - ignition switch moved to the cage area - upper triple tree clamp with the possibility of mounting risers for a wide handlebar. The engine runs evenly and quietly. VIDEO: https://youtu.be/0ODp1nPfZnQ Price can be negotiated. Shipment possible. Phone number: +48668419384 Address: Łąka near Pszczyna in Silesia, Poland Please feel free to contact.
  • Handbrake caliper bracket. Material: 7075 T6 Aluminum (PA9) Number of calipers: 3x radial brake caliper  Brake disc diameter: 300mm Brackets are made for a 300 mm floating brake disc mounted directly on the rim (without adapters). Set includes: 1. Aluminium handbrake bracket 2. 3x radial Brembo calipers with pads 3. Disc brake 300 mm 4. Caliper mounting bolts On the photos: @aras_freestyle
  • Upper triple tree clamp designed for the BMW S1000RR forks - a product that is essential for the mounting  of this suspension, e.g. in BMW K75, K100, or K1100. The yoke is made like the stock top triple from a BMW S1000RR, with the difference that it gives the possibility to mount a Motogadget PRO speedo. Motogadget counters and boxes are also available in our offer. Set includes a Motogadget Motoscope PRO speedometer along with a Box A. Fork diameter: 55mm Material: Aluminum PA6 Recommended product!
  • A new model of fronts sets for: Honda CX 500 Material: aluminum alloy PA6 Set includes everything you see in the pictures (rear sets on bike have black colour) All parts are new and ready for mounting.  Recommended product!
  • A new model of fronts sets for: Honda CX 500 Material: aluminum alloy PA6 Set includes everything you see in the pictures (rear sets on bike have black colour) All parts are new and ready for mounting.  Recommended product!
  • A new model of DUAL sets, which contains: -front driver's sets + rear passenger's sets suitable for: BMW K100 BMW K75 BMW K1100 (all years and versions) DUAL MODEL - short front sets + passenger sets with footrests It is possible to mount only the driver's sets. The passenger's sets are easy & quick to install. Material: aluminum alloy PA6 Spacing of the mounting holes: 90 mm Set includes: - two aluminum sets, - master cylinder and brake fluid reservoir, - two footrests, - foot brake lever, - gearshift lever, - transmission link including the connector, - hydraulic STOP sensor, - spring, - steel braided brake line (black), - bolts and nuts, ...so everything you see in the pictures. All parts are new and ready for mounting.  Recommended product!
  • Handbrake caliper bracket. Material: 7075 T6 Aluminum (PA9) Number of calipers: 2x radial brake caliper   Brake disc diameter: 300mm Brackets are made for a 300 mm floating brake disc mounted directly on the rim (without adapters). Set includes: 1. Aluminium handbrake bracke 2. 2x radial Brembo calipers with pads 3. Disc brake 300 mm 4. Caliper mounting bolts  
  • The set is mainly prepared for spoke wheels, where the size of the original brake disc does not allow the mounting of larger calipers. Motorcycle: BMW R80 and R100 The kit includes: - Two new 300 mm floating brake discs ready to be fitted under original BMW disc hubs - two aluminum brake caliper brackets for dual-piston calipers - two brake calipers with new pads - a bundle of bolts. It is possible to complete the entire braking system together with the brake master cylinder and brake lines.
  • A new radial master cylinder for MAGURA road motorcycles, HC1 model. This is the best pump for handbrake (stunt) systems using our single caliper mounts. We highly recommend it for kits intended for KTM, Husqvarna, Husaberg. The pump works very well with one radial four-piston caliper, which are most often mounted as an additional caliper in HB systems. Description: - black colour - pump piston 13mm - long lever - fluid reservoir included - very easy to install - for DOT brake fluid - STOP sensor Item No. 2100489 We recommend completing the entire system: pump + 200 cm cable + fixing + clamp + 300 mm shield.
  • A new model of fronts sets for: BMW K100 BMW K75 BMW K1100 (all years and versions) MODEL 3 - short front sets - MODEL 2 with height adjustment. Material: aluminum alloy PA6 Spacing of the mounting holes: 90 mm Set includes: - two aluminum sets, - 2-point height adjustment, - master cylinder and brake fluid reservoir, - two footrests, - foot brake lever, - gearshift lever, - 2x transmission link including the connector, - hydraulic STOP sensor, - spring, - steel braided brake line (black), - bolts and nuts, ...so everything you see in the pictures. All parts are new and ready for mounting.  Recommended product!
  • Handbrake caliper bracket. Material: 7075 aluminum Number of calipers: 2x Nissin brake caliper  Set includes: 1. Handbrake bracket 2. Caliper mounting bolts 3. Brake calipers with brake pads Numer OEM: 76513075000 7601317500001 7601308000101   Recommend the Magura HC1 13mm DOT radial pump and the 200 cm brake hose, which can be found in our offer.
  • YSS accessory rear shock absorber. Type: gas Upper mount: Eyelet Inner eyelet diameter: 12 mm Length: 350 360 mm Bottom mount: Eyelet Inner eyelet diameter: 12 mm Adjustment: spring back tension (stepless) Spring colour: Black Spring characteristics: 45-60 Spring length: 220 mm Spring diameter: 46 mm Manufacturer: YSS Piston diameter: 36 mm Bar diameter: 16 mm
  • YSS accessory rear shock absorber. Type: gas Upper mount: Eyelet Inner eyelet diameter: 12 mm Length: 380-390 mm Bottom mount: Eyelet Inner eyelet diameter: 12 mm Adjustment: spring back tension (stepless) Spring colour: Black Spring characteristics: 55 Spring length: 240 mm Spring diameter: 46 mm Manufacturer: YSS Piston diameter: 36 mm Bar diameter: 16 mm
  • A new model of fronts sets for: BMW K100 BMW K75 BMW K1100 (all years and versions) MODEL 2B - short black front sets. Material: aluminum alloy PA6 Spacing of the mounting holes: 90 mm Set includes: - two aluminum sets, - master cylinder and brake fluid reservoir, - two footrests, - foot brake lever, - gearshift lever, - transmission link including the connector, - hydraulic STOP sensor, - spring, - steel braided brake line (black), - bolts and nuts, ...so everything you see in the pictures. All parts are new and ready for mounting. Recommended product!
  • A new model of fronts sets for: BMW K100 BMW K75 BMW K1100 (all years and versions) MODEL 1B - long black front sets. Material: aluminum alloy PA6 Spacing of the mounting holes: 90 mm Set includes: - two aluminum sets, - master cylinder and brake fluid reservoir, - two footrests, - foot brake lever, - gearshift lever, - transmission link including the connector, - hydraulic STOP sensor, - spring, - steel braided brake line (black), - bolts and nuts, ...so everything you see in the pictures. All parts are new and ready for mounting.  Recommended product!
  • A new radial master cylinder for MAGURA road motorcycles, HC1 model. This is the best pump for handbrake (stunt) systems using our two caliper mounts. We highly recommend it for kits intended for Kawasaki, Honda, Suzuki and Yamaha. The pump works very well with two radial four-piston caliper, which are most often mounted as an additional caliper in HB systems. Description: - black colour - pump piston 16mm - long lever - fluid reservoir included - very easy to install - for DOT brake fluid - STOP sensor Item No. 2100457 We recommend completing the entire system: pump + 200 cm cable + fixing + clamp + 300 mm shield.
  • A new model of fronts sets for: BMW K100 BMW K75 BMW K1100 (all years and versions) MODEL 1 - long front sets. Material: aluminum alloy PA6 Spacing of the mounting holes: 90 mm Set includes: - two aluminum sets, - master cylinder and brake fluid reservoir, - two footrests, - foot brake lever, - gearshift lever, - transmission link including the connector, - hydraulic STOP sensor, - spring, - steel braided brake line (black), - bolts and nuts, ...so everything you see in the pictures. All parts are new and ready for mounting.  Recommended product!
  • A new model of fronts sets for: BMW K100 BMW K75 BMW K1100 (all years and versions) MODEL 2 - short front sets. Material: aluminum alloy PA6 Spacing of the mounting holes: 90 mm Set includes: - two aluminum sets, - master cylinder and brake fluid reservoir, - two footrests, - foot brake lever, - gearshift lever, - transmission link including the connector, - hydraulic STOP sensor, - spring, - steel braided brake line (black), - bolts and nuts, ...so everything you see in the pictures. All parts are new and ready for mounting.  Recommended product!
  • Upper triple tree clamp designed for the BMW S1000RR forks - a product that is essential for the mounting  of this suspension, e.g. in BMW K75, K100, or K1100. The yoke is made like the stock top triple from a BMW S1000RR, with the difference that it gives the possibility to mount a Motogadget PRO speedo. Motogadget speedometers and boxes are also available in our offer. Fork diameter: 55mm Material: Aluminum PA6 Recommended product!
  • Out of stock
    Aluminum top triple tree clamp made with the CNC technology. Motorcycle: Honda CBR 600 F4, F4i FS sport PC35 Year: 1999-2007 Material: Aluminum PA6 Description: Yoke made entirely of PA6 aluminum alloy. Set includes risers for a 28,6mm fatbar handlebar & an aluminum Accel handlebar. The yoke is much stronger in comparison to the stock one and also allows to mount all types of handlebars used in stunt riding.
  • A very solid 22cm swingarm extension. Motorcycle: Honda CBR F4 F4i FS Sport (1999-2007) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • A very solid 22cm swingarm extension. Motorcycle: Kawasaki ZX6R 636 (2003-2004) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • Handbrake caliper bracket. Bracket made for mounting two additional brake calipers and the original rear Brembo brake caliper. A right front dual piston floating Tokico caliper must be mounted in the upper position (e.g. from a Suzuki SV 650 1999-2008). In the lower position, a left Tokico brake caliper can be mounted. In case of mounting only the upper caliper - the mountings of the lower caliper are almost invisible or can be unscrewed. Video of the previous version of the mounting: https://www.youtube.com/watch?v=M6AWLEaq054 The whole product is powder-coated in black. Set includes: - bracket, - 2x brake caliper (upper & lower), - brake disc bolts, - caliper mounting bolts. Number of the original brake caliper bracket: 54813075000 Recommended product!  
  • Handbrake caliper bracket. Bracket made for mounting two additional brake calipers and the original rear Brembo brake caliper. A right front dual piston floating Tokico caliper must be mounted in the upper position (e.g. from a Suzuki SV 650 1999-2008). In the lower position, a left Tokico brake caliper can be mounted. In case of mounting only the upper caliper - the mountings of the lower caliper are almost invisible or can be unscrewed. Video of the previous version of the mounting: https://www.youtube.com/watch?v=M6AWLEaq054 The whole product is powder-coated in black. Set includes: - bracket, - 2x brake caliper (lower & upper), - brake disc bolts, - caliper mounting bolts. Number of the original brake caliper bracket: 54813075000 Recommended product!  
  • Handbrake caliper bracket. Bracket made for mounting two additional brake calipers and the original rear Brembo brake caliper. A right front dual piston floating Tokico caliper must be mounted in the upper position (e.g. from a Suzuki SV 650 1999-2008). In the lower position, a left Tokico brake caliper can be mounted. In case of mounting only the upper caliper - the mountings of the lower caliper are almost invisible or can be unscrewed. Video of the previous version of the mounting: https://www.youtube.com/watch?v=M6AWLEaq054 The whole product is powder-coated in black. Set includes: - bracket, - 2x brake caliper (upper & lower), - brake disc bolts, - caliper mounting bolts. Number of the original brake caliper bracket: 54813075000 Recommended product!  
  • Out of stock
    Aluminum top triple tree clamp made with the CNC technology. Motorcycle: Honda CBR 929 oraz 954RR (00-03) Year: 2000-2003 Material: Aluminum PA6 Description: Yoke made entirely of PA6 aluminum alloy. It is possible to mount CLIP-ONs above and below the top triple and a wide MX handlebar (M10 holes). Set includes risers for 28,6mm fatbar handlebar.  The yoke is much stronger in comparison to the stock one and also allows to mount all types of handlebars used in stunt riding.

Go to Top