fbpx
  • Stunt cage protecting the engine from damages. Guarantees stress-free workouts. Easy to mount. The cage can be mounted on fairings, but this will require modification. Set includes: - crash cage - left & right side, - crash pads, - bolts, nuts and spacers needed to mount the cage. Highly recommended product - the cage is solid, yet lightweight.
  • A sump baffle for Honda CBR F4i FS sport engines. It is mounted to keep the oil in the pan while riding on one wheel. Thanks to this partition, the engine has constant lubrication. Recommended product!
  • A set of pegs for one axle on your motorcycle. Pegs are prepared to be mounted on a threaded rod M8 (standard size). The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg. Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 8 mm - you will not mount these pegs. Set contains: - 2x aluminum peg with plastic end Overall length: 80mm Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident. We also offer pegs mounted on an M10 threaded rod (for smaller holes in the axis).
  • Accessory fan from SPAL Condition: NEW OEM number: 17401461579 Fits BMW: K1 K75 K100 K1100 (all models and years)   A known and common failure point of the cooling system is the original cooling fan. With periods of sitting, the fan motor bearings seize causing the brushes to heat up enough to melt the plastic arms supporting the brushes to the motor housing, causing permanent failure. A worthy upgrade is to replace with an upgraded, SPAL fan unit. With a slimmer profile and increased CFM, you'll be sure to decrease engine temps much more quickly than the original unit. Supersedes: 17401460427 - (08/01/1983 - 06/04/2015) Part 17401461579 was found on the following vehicles: K589 (K1, K 100 RS) - (08/1988 - 09/1993) K589 (K 1100 RS, K 1100 LT) - (06/1989 - 04/1999) K589 (K100, RS, RT, LT) - (05/1982 - 10/1991) K569 (K 75, K 75 C, K 75 S, K 75 RT) - (12/1984 - 06/2005) SPAL Brushed Axial fans provide longer life, superior performance compared to standard products. All IP68 certified SPAL motors are WP (Water Proof) which means they are completely sealed and therefore protected against ingress of solid and liquid agents. SPAL fan comes mounted on a laser cut, 3mm thick, stainless steel (304) adapter plate, replicating the same mounts as the original fan. Connector included to make connecting the new fan a cinch.  
  • Fuel pressure regulator. Condition: NEW OEM number: 13531460451 Fits BMW K100 8V (1982-1988) BMW K75
  • Silicone ignition cables Motorcycle: BMW K100 16V and K1100 (1989-2002) OEM number: 12122305041 Condition: NEW Full set of HT cables for BMW K100 16V and K1100 models. HT cables can be used with both Bosch and NGK spark plugs, provided the NGK spark plugs have a connector at the end. We highly recommend it!
  • Silicone ignition cables Motorcycle: BMW K100 8V (1982-1991) OEM number: 12121459874 Condition: NEW Full set of HT cables for BMW K100 8V models. HT cables can be used with both Bosch and NGK spark plugs, provided the NGK spark plugs have a connector at the end. We highly recommend it!
  • Silicone ignition cables Motorcycle: BMW K75 (1984-1991) Number OEM: 1212145987 Condition: NEW Full set of HT cables for BMW K75 models. HT cables can be used with both Bosch and NGK spark plugs, provided the NGK spark plugs have a connector at the end. We highly recommend it!
  • A very solid 22cm swingarm extension. Motorcycle: Yamaha R1 RN19 (2007-2008) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • A very solid 22cm swingarm extension. Motorcycle: Yamaha R6 (2003-2005) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • A very solid 22cm swingarm extension. Motorcycle: Suzuki GSX-R 600 750 K4 K5 (2004-2005) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • A very solid 22cm swingarm extension. Motorcycle: Suzuki GSX-R 1000 K5 K6 (2005-2006) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • A very solid 22cm swingarm extension. Motorcycle: Kawasaki ZX6-R 636 (2005-2006) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • A very solid 22cm swingarm extension. Motorcycle: Triumph Street Triple 675 (2007-2012) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product! ATTENTION! The extension fits the swingarm with 8 dots (chain tension scale). The serial number of the original OEM swingarm is 2053002 Also fits Triumph Daytona 675 (2009-2012) - check number of dots and OEM number
  • A very solid 22cm swingarm extension. Motorcycle: Honda CBR 600RR PC37 (2003-2004) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • A very solid 22cm swingarm extension. Motorcycle: Honda CBR F4 F4i FS Sport (1999-2007) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • A set of pegs for one axle on your motorcycle. Pegs are prepared to be mounted on a threaded rod M10 x 1.25 (standard size). The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg. Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 10 mm - you will not mount these pegs. Set contains: - 2x aluminum peg with plastic end Overall length: 80mm Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident. We also offer pegs mounted on an M8 threaded rod (for smaller holes in the axis).
  • Brak w magazynie
    Oil level sight glass Condition: NEW OEM number: 11118523906 Fits K1 K75 K100 K1100 K1200 F650 R850 R900 R1100 R1150 R1200 R9T S1000RR (1982 / 2019)

Title