fbpx

Cafe racer mufflers

Motorcycle mufflers are the basic exhaust components of a motorcycle approved for road use. Mufflers cancel out the noise emitted from the engine when the mixture is burned. Hmmm… but do we really care about that? We manufacture two types of mufflers – stunt exhaust for high-performance motorcycles and cafe racer exhaust.

More

Stunt exhausts

Stunt muffler for sport motorcycles are supposed to be as small as possible so that they don’t interfere with the performance of tricks and are resistant to possible damage, so they are hidden under the motorcycle. At the same time, their sound is supposed to be aggressive (without exaggeration, of course). Exhausts for cafe racer projects, that is, in our case, mainly BMW K75, K100 or K1100, are designed to look beautiful and work exemplarily with the engine. In order to be able to drive quietly on public roads in the set with exhausts for BMW we always add a db-killer, which significantly silences the exhaust tip. All our mufflers are made of weather-resistant stainless steel. To make it easier to install Dixer Parts exhausts on BMW K-series, we have prepared muffler mounts that fit our front driver sets.

Check out our exhaust systems!

  • A short exhaust, ready to be mounted on the motorcycle. >Just remove the original silencer and put our short one in its place. The muffler gives us a much better sound, less weight and most importantly - it does not interfere with our tricks. Material: stainless steel Recommended product!
  • Accessory exhaust kit ready to fit on all BMW K100 and K1100 models. The kit includes: - exhaust - db killer - 4in1 collector - spring Dimensions: Exhaust length (without 4in1): 43 cm Outer diameter of the 4in1 outlet: 50.8 mm 4in1 connector length: 185mm Exhaust prepared for installation with our rearsets: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - dual (DP5028 and DP5031) thanks to use of exhaust mounts available in our store (DP9080) The muffler is made of stainless steel and gives the bike a very nice look. The angle is adjusted to the line of the fuel tank, thanks to which it presents very well. Db-killer can be freely modified by drilling more holes, which will make the exhaust louder. We recommend installing the Db-killer before the periodic technical inspection :) The exhaust dont have TUV certified. Before installing, loosen the collectors bolts at the engine head. In the K100 models from the years (82-89) it is enough to unscrew the serial exhaust, in the K100RS 16V models after 1989 and K1100 the exhaust should be cut at the height of the side stand mounting (see photo). After installing the 4in1 adapter, tighten the screws of the collectors.
  • Exhaust mounting (DP9078) prepared for all BMW K100 and K1100 models The mount works with our sets: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - dual (DP5028 and DP5031) The kit includes: - exhaust mount - spacer sleeve - a set of screws The mount is made of PA6 / PA9 aluminum alloy and it connects our products in a very nice way: sets and exhaust. Thanks to this, it is possible to quickly install custom components without thinking about how to put them together.
  • 4-in-1 collector pass-through ready to install on all BMW K100 and K1100 models The kit includes: - 4in1 collector - spring The 4in1 transition fits perfectly with the exhaust (DP9076). Dimensions: - outer diameter of the outlet: 50.8 mm - overall length: 185 mm It is made of stainless steel and gives the bike a very nice look. Before installing, loosen the collector bolts at the engine head. In the K100 models from the years (82-89) it is enough to unscrew the serial exhaust, in the K100RS 16V models after 1989 and K1100 the exhaust should be cut at the height of the side stand mounting (see photo). After installing the 4in1 adapter, tighten the screws of the collectors.
  • Accessory exhaust ready to fit on all BMW K75 models. The kit includes: - exhaust - db killer Exhaust prepared for installation with our rearsets: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - dual (DP5028 and DP5031) thanks to use of exhaust mounts available in our store (DP9080) The muffler is made of stainless steel and gives the bike a very nice look. The angle is adjusted to the line of the fuel tank, thanks to which it presents very well. Db-killer can be freely modified by drilling more holes, which will make the exhaust louder. We recommend installing the Db-killer before the periodic technical inspection :) The exhaust dont have TUV certified.
  • A short exhaust, ready to be mounted on the motorcycle. >Just remove the original silencer and put our short one in its place. The muffler gives us a much better sound, less weight and most importantly - it does not interfere with our tricks. Material: stainless steel Recommended product!
  •   Accessory manifolds ready to be installed in all BMW K100 and K1100 models. Perfectly matched to our 4-in-1 adapter (DP9079), which can be found in our store. Together with the muffler, driver / passenger sets and exhaust mount for our sets, they make a great set ready to put on. The kit includes: - 4x collector - 4x pressure flange Check out our sets prepared for K100 /K1100: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - double (DP5028 and DP5031) and exhaust mounts available in our store (DP9080) The exhaust is made of stainless steel and gives the motorcycle a very nice look.
  • A short exhaust, ready to be mounted on the motorcycle. >Just remove the original silencer and put our short one in its place. The muffler gives us a much better sound, less weight and most importantly - it does not interfere with our tricks. Material: stainless steel Recommended product!
  • Exhaust mounting (DP9077) prepared for all BMW K75 models The mount works with our sets: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - dual (DP5028 and DP5031) The kit includes: - exhaust mount - spacer sleeve - a set of screws The mount is made of PA6 / PA9 aluminum alloy and it connects our products in a very nice way: sets and exhaust. Thanks to this, it is possible to quickly install custom components without thinking about how to put them together.
  • Accessory, short exhaust, ready to install on a motorcycle with a catalytic converter. Just disassemble the original exhaust and put our short exhaust in its place. Thanks to this, we gain a great sound, less weight and most importantly - the exhalation does not interfere with us while performing tricks. The silencer is made of stainless steel. We recommend!
  • Accessory exhaust ready to fit on all BMW K100 and K1100 models. Perfectly suited to our 4in1 collector (DP9079), which can be found in our store. The kit includes: - exhaust - db killer Dimensions: Muffler length (without 4in1): 43 cm Exhaust prepared for installation with our rearsets: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - dual (DP5028 and DP5031) thanks to use of exhaust mounts available in our store (DP9080) The muffler is made of stainless steel and gives the bike a very nice look. The angle is adjusted to the line of the fuel tank, thanks to which it presents very well. Db-killer can be freely modified by drilling more holes, which will make the exhaust louder. We recommend installing the Db-killer before the periodic technical inspection :) The exhaust dont have TUV certified.

Title