fbpx
  • Stunt clutch lever with a bearing Colour: black (anodised) Handlebar diameter: 22mm Model: with a bearing Option: three cable fixing positions The clutch levers are made of a 6061 aluminum, using the CNC milling technology. The use of a bearing improves the precision of clutch operation and extends the service life. The whole set is very solid and impact-resistant. The levers are prepared for use with one or two fingers. Additional anodisation increases resistance to corrosion and improves aesthetic values.
  • The universal brake fluid reservoir is the perfect complement to modifying your motorcycle. Tank fits: - to most of our top tree - for our front sets produced for the BMW K-series Made of plastic, anti-corrosion ensures long-term use. Modern, aesthetic appearance goes hand in hand with tightness and the possibility of mounting in many places. The price is for one piece.
  • A new radial master cylinder for MAGURA road motorcycles, HC1 model. This is the best pump for handbrake (stunt) systems using our single caliper mounts. We highly recommend it for kits intended for KTM, Husqvarna, Husaberg. The pump works very well with one radial four-piston caliper, which are most often mounted as an additional caliper in HB systems. Description: - black colour - pump piston 13mm - long lever - fluid reservoir included - very easy to install - for DOT brake fluid - STOP sensor Item No. 2100489 We recommend completing the entire system: pump 200 cm cable fixing clamp 300 mm shield.
  • Clutch lever extension on the engine. Note! Before buying, please make sure that there is a place and the possibility of installing the lever. If the standard mount is directed towards the engine and there is no place for extending the lever without bending it, please think carefully about the purchase. The assembly of the lever allows the clutch to be operated more easily. The lever arm becomes longer, i.e. the force that needs to be used for the clutch to work is smaller. Our adapter is a very good option when the assembly of the clutch handle with easy pull and the easy pull does not help. To install the lever, one hole must be drilled in the standard clutch arm. Material: steel Black colour The motorcycle model that this product most often finds is the Honda CBR 600 F4 / F4i / FS Sport (1999-2007).
  • A straight handlebar made by Accel. Diameter (in place of mounting for risers) - 28,6mm Diameter (in place of the grips) - 22mm Material: Aluminum All accessories for enduro and cross motorcycles manufactured under the Accel brand are products of high quality and good design. They improve the work of many elements of a motorcycle giving it an attractive appearance. Accel motorcycle accessories are wear-resistant and well suited to your bike. Application: stunt riding, cafe racer, scrambler, fmx, hard enduro Highly recommended product!
  • A new radial master cylinder for MAGURA road motorcycles, HC1 model. This is the best pump for handbrake (stunt) systems using our two caliper mounts. We highly recommend it for kits intended for Kawasaki, Honda, Suzuki and Yamaha. The pump works very well with two radial four-piston caliper, which are most often mounted as an additional caliper in HB systems. Description: - black colour - pump piston 16mm - long lever - fluid reservoir included - very easy to install - for DOT brake fluid - STOP sensor Item No. 2100457 We recommend completing the entire system: pump 200 cm cable fixing clamp 300 mm shield.
  • Universal bracket of brake reservoirs. Material: stainless steel Fixing: M6 bolt The mount solved a lot of our problems with the symmetrical positioning of the brake reservoirs. When mounted to the handlebar/master cylinder or clutch, you can position the tank as you like it best. Who are these bracket for? - Stunt - the ability to hide the tank below the handlebar so as not to get caught during tricks. - Cafe Racer - a minimalist look is a great solution when building beautiful motorcycles.
  • Brak w magazynie
    A handlebar made by Magura. Diameter (in place of mounting for risers) - 28,6mm Diameter (in place of the grips) - 22mm Material: Aluminum -Patented production process -High strength aluminum -Gentle on the joints due to the ergonomic shape -Longer service life due to shot-peened finish -TÜV-geprüft und mit Gutachten All accessories for enduro and cross motorcycles manufactured under the Magura brand are products of high quality and good design. They improve the work of many elements of a motorcycle giving it an attractive appearance. Magura motorcycle accessories are wear-resistant and well suited to your bike. Application: stunt riding, cafe racer, scrambler, fmx, hard enduro Highly recommended product!
  • A set of pegs for one axle on your motorcycle. Pegs are prepared to be mounted on a threaded rod M10 x 1.25 (standard size). The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg. Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 10 mm - you will not mount these pegs. Set contains: - 2x aluminum peg with plastic end Overall length: 80mm Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident. We also offer pegs mounted on an M8 threaded rod (for smaller holes in the axis).
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 50 cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 50 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 33 cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 33 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • A set of pegs for one axle on your motorcycle. Pegs are prepared to be mounted on a threaded rod M8 (standard size). The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg. Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 8 mm - you will not mount these pegs. Set contains: - 2x aluminum peg with plastic end Overall length: 80mm Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident. We also offer pegs mounted on an M10 threaded rod (for smaller holes in the axis).
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 100cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 100 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • We offer the service of rebuilding your tank (fuel tank) into one that will work better when driving on a wheel. Modification: - profiling the shape of the tank and welding the sheet together with reinforcements inside - welding the fuel cap in the upper part of the tank and modifying the vent - painting the tank in black gloss - gluing the upper part with a non-slip mat and strengthening the edges with glue. Time: 2-3 weeks How to do it? Before purchasing, please contact us by email: dixerparts@gmail.com We will set the dates and you can send your tank to us. Remember to thoroughly remove the fuel from it. We will send you the shipping address by email. Due to many different shades, we paint black, the color of the mat is also black.
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 65t Chain: DID 525 VX (reinforced X-ring, gold) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/65 ratio drive is perfect for those who ride mainly on squares and smaller spots. It lets the rider to easily slow down the bike enough to be able to perform all tricks while stunt riding. The maximum speed will drop significantly, but at this point - it doesn't matter. Recommended product!
  • Subcage - steel rear sets with knurled aluminum pegs. The sets are joined underneath the undertray, which makes them very solid yet lightweight. Material: steel + aluminum Colour: black, powder coated Note! Can only be mounted on the bottom exhaust version. Set includes: - subcage, - 2x 30 mm aluminum pegs with bolts Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 50t Chain: DID 525 VX (reinforced X-ring, colour: silver) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/50 ratio drive used in 600 ccm motorbikes is a good choice for street stunt riding. It makes it easier to do wheelies and gives a better acceleration with a slight decrease in the maximum speed - this is the effect than many customers ask about. Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 70t Chain: DID 525 VX (reinforced X-ring, colour: silver) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/70 ratio drive is used by many Stunt Riders in the world. What matters is the flexibility at low revs, thanks to which we can smoothly switch between tricks while stunt riding. Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 55t Chain: DID 525 VX (reinforced X-ring, gold) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/55 ratio drive used in 600 ccm motorbikes is an option that is mainly chosen by customers who want to aggressively drive around the city and start having fun on the stunt spots. After installing this type of drive, it is much easier to slow down the wheelies. Recommended product!
  • A passenger seat made of the highest quality materials. The seat has a hole for a leg, which is covered with thick, natural leather. Thanks to this, the foot does not slip and you can precisely control the motorcycle. The sides and front are covered with abrasion-resistant material, which makes it very solid and resistant to falls. The set includes a seat ready to be put on. The seat can be slightly different from the one shown in the picture because each piece is done by hand. Recommended product!
  • A very solid 22cm swingarm extension. Motorcycle: Yamaha R6 (2003-2005) Material: Aluminum alloy Length: 22 cm extension The extension effectively helps with preparing the motorcycle for drifting and is safe. Ready to mount with the swingarm. Everything you need for mounting is included. Recommended product!
  • Brak w magazynie
    Aluminum top triple tree clamp made with the CNC technology. Motorcycle: Yamaha R6 (2003-2005) Forks must have 50 mm diameter in mounting place. Material: Aluminum PA6 Description: Yoke made entirely of PA6 aluminum alloy. It is possible to mount CLIP-ONs above and below the top triple and a wide MX handlebar. CLIP-ONs and risers are also available in our store. The yoke is much stronger in comparison to the stock one and also allows to mount all types of handlebars used in stunt riding. Top tripe prepared for mounting brake tanks (tanks are not included with the top triple).
  • A set of front sets including aluminum pegs. Sets ready for mounting stock gearshift lever and a foot brake. Set includes: - two steel sets, - two knurled aluminum pegs - fi 22 mm x 100 mm - hydraulic pressure sensor. Ready for mounting.
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 55t Chain: DID 525 VX (reinforced X-ring, colour: silver) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/55 ratio drive used in 600 ccm motorbikes is an option that is mainly chosen by customers who want to aggressively drive around the city and start having fun on the stunt spots. After installing this type of drive, it is much easier to slow down the wheelies. Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 60t Chain: DID 525 VX (reinforced X-ring, colour: silver) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATON: The 15/60 ratio drive is the most-sold drive on motorcycles with a 600 ccm capacity. It shouldn't be a surprise, as it's a universal drive. It lets the user to both stunt ride (do circle wheelies etc.) and ride home from the stunt spot without any major problems. Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 65t Chain: DID 525 VX (reinforced X-ring, colour: silver) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/65 ratio drive is perfect for those who ride mainly on squares and smaller spots. It lets the rider to easily slow down the bike enough to be able to perform all tricks while stunt riding. The maximum speed will drop significantly, but at this point - it doesn't matter. Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 50t Chain: DID 525 VX (reinforced X-ring, gold) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/50 ratio drive used in 600 ccm motorbikes is a good choice for street stunt riding. It makes it easier to do wheelies and gives a better acceleration with a slight decrease in the maximum speed - this is the effect than many customers ask about. Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 60t Chain: DID 525 VX (reinforced X-ring, gold) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATON: The 15/60 ratio drive is the most-sold drive on motorcycles with a 600 ccm capacity. It shouldn't be a surprise, as it's a universal drive. It lets the user to both stunt ride (do circle wheelies etc.) and ride home from the stunt spot without any major problems. Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear steel sprocket: 70t Chain: DID 525 VX (reinforced X-ring, gold) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/70 ratio drive is used by many Stunt Riders in the world. What matters is the flexibility at low revs, thanks to which we can smoothly switch between tricks while stunt riding. Recommended product!
  • Complete chain kit with increased gear ratio. Front sprocket: 15t Rear aluminum sprocket: 50t Chain: DID 525 VX (reinforced X-ring, colour: silver) The chain length is adjusted to the size of the sprockets. Always check the correct length before connecting the chain. APPLICATION: The 15/50 ratio drive used in 600 ccm motorbikes is a good choice for street stunt riding. It makes it easier to do wheelies and gives a better acceleration with a slight decrease in the maximum speed - this is the effect than many customers ask about. Recommended product!

Title