fbpx
  • Stunt clutch lever with a bearing Colour: black (anodised) Handlebar diameter: 22mm Model: with a bearing Option: three cable fixing positions The clutch levers are made of a 6061 aluminum, using the CNC milling technology. The use of a bearing improves the precision of clutch operation and extends the service life. The whole set is very solid and impact-resistant. The levers are prepared for use with one or two fingers. Additional anodisation increases resistance to corrosion and improves aesthetic values.
  • The universal brake fluid reservoir is the perfect complement to modifying your motorcycle. Tank fits: - to most of our top tree - for our front sets produced for the BMW K-series Made of plastic, anti-corrosion ensures long-term use. Modern, aesthetic appearance goes hand in hand with tightness and the possibility of mounting in many places. The price is for one piece.
  • A new radial master cylinder for MAGURA road motorcycles, HC1 model. This is the best pump for handbrake (stunt) systems using our single caliper mounts. We highly recommend it for kits intended for KTM, Husqvarna, Husaberg. The pump works very well with one radial four-piston caliper, which are most often mounted as an additional caliper in HB systems. Description: - black colour - pump piston 13mm - long lever - fluid reservoir included - very easy to install - for DOT brake fluid - STOP sensor Item No. 2100489 We recommend completing the entire system: pump 200 cm cable fixing clamp 300 mm shield.
  • Clutch lever extension on the engine. Note! Before buying, please make sure that there is a place and the possibility of installing the lever. If the standard mount is directed towards the engine and there is no place for extending the lever without bending it, please think carefully about the purchase. The assembly of the lever allows the clutch to be operated more easily. The lever arm becomes longer, i.e. the force that needs to be used for the clutch to work is smaller. Our adapter is a very good option when the assembly of the clutch handle with easy pull and the easy pull does not help. To install the lever, one hole must be drilled in the standard clutch arm. Material: steel Black colour The motorcycle model that this product most often finds is the Honda CBR 600 F4 / F4i / FS Sport (1999-2007).
  • A straight handlebar made by Accel. Diameter (in place of mounting for risers) - 28,6mm Diameter (in place of the grips) - 22mm Material: Aluminum All accessories for enduro and cross motorcycles manufactured under the Accel brand are products of high quality and good design. They improve the work of many elements of a motorcycle giving it an attractive appearance. Accel motorcycle accessories are wear-resistant and well suited to your bike. Application: stunt riding, cafe racer, scrambler, fmx, hard enduro Highly recommended product!
  • Steel sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 55 Chain type: 520 Outer diameter: 287 mm Material: Abrasion-resistant steel of high quality Colour: black (powder coating) Mounting symbol: JTR1478 JTR478 SUNR1-3356 When it comes to sprocket choices for Kawasaki motorcycles, our 55T option stands out as one of the most popular and highly preferred among riders. While the 60T sprocket might be an alternative choice for some, the 55T sprocket emerges as the optimal option for street riding enthusiasts. With its carefully calculated teeth count, the 55T sprocket strikes a perfect balance between power and performance. It offers an ideal gearing ratio that enhances your street riding experience, providing the necessary torque for quick acceleration while maintaining a satisfactory top speed. Many seasoned riders have found the 55T sprocket to be the sweet spot that perfectly aligns with their street riding needs. You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 
  • A new radial master cylinder for MAGURA road motorcycles, HC1 model. This is the best pump for handbrake (stunt) systems using our two caliper mounts. We highly recommend it for kits intended for Kawasaki, Honda, Suzuki and Yamaha. The pump works very well with two radial four-piston caliper, which are most often mounted as an additional caliper in HB systems. Description: - black colour - pump piston 16mm - long lever - fluid reservoir included - very easy to install - for DOT brake fluid - STOP sensor Item No. 2100457 We recommend completing the entire system: pump 200 cm cable fixing clamp 300 mm shield.
  • Universal bracket of brake reservoirs. Material: stainless steel Fixing: M6 bolt The mount solved a lot of our problems with the symmetrical positioning of the brake reservoirs. When mounted to the handlebar/master cylinder or clutch, you can position the tank as you like it best. Who are these bracket for? - Stunt - the ability to hide the tank below the handlebar so as not to get caught during tricks. - Cafe Racer - a minimalist look is a great solution when building beautiful motorcycles.
  • A handlebar made by Magura. Diameter (in place of mounting for risers) - 28,6mm Diameter (in place of the grips) - 22mm Material: Aluminum -Patented production process -High strength aluminum -Gentle on the joints due to the ergonomic shape -Longer service life due to shot-peened finish -TÜV-geprüft und mit Gutachten All accessories for enduro and cross motorcycles manufactured under the Magura brand are products of high quality and good design. They improve the work of many elements of a motorcycle giving it an attractive appearance. Magura motorcycle accessories are wear-resistant and well suited to your bike. Application: stunt riding, cafe racer, scrambler, fmx, hard enduro Highly recommended product!
  • A set of pegs for one axle on your motorcycle. Pegs are prepared to be mounted on a threaded rod M10 x 1.25 (standard size). The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg. Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 10 mm - you will not mount these pegs. Set contains: - 2x aluminum peg with plastic end Overall length: 80mm Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident. We also offer pegs mounted on an M8 threaded rod (for smaller holes in the axis).
  • Steel sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 50 Chain type: 520 Outer diameter: 262 mm Material: Abrasion-resistant steel of high quality Colour: black (powder coating) Mounting symbol: JTR1478 JTR478 SUNR1-3356 You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. The 50t sprocket used in 600/636 ccm motorbikes is a good choice for street stunt riding. It makes it easier to do wheelies and gives a better acceleration with a slight decrease in the maximum speed – this is the effect than many customers ask about. If you haven't found the sprocket you were looking for in our store - contact us. 
  • Steel sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 60 Chain type: 520 Outer diameter: 312 mm Material: Abrasion-resistant steel of high quality Colour: black (powder coating) Mounting symbol:  JTR1478 JTR478 SUNR1-3356 If you're seeking the perfect balance between high-speed street riding and close ground tricks, look no further than the versatile Sprocket 60T. Recognized as the most universal choice in the world of stunt riding, this exceptional sprocket offers a remarkable combination of speed, maneuverability, and trick performance. You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 50 cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 50 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 33 cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 33 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • A set of pegs for one axle on your motorcycle. Pegs are prepared to be mounted on a threaded rod M8 (standard size). The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg. Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 8 mm - you will not mount these pegs. Set contains: - 2x aluminum peg with plastic end Overall length: 80mm Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident. We also offer pegs mounted on an M10 threaded rod (for smaller holes in the axis).
  • Steel sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 65 Chain type: 520 Outer diameter: 338 mm Material: Abrasion-resistant steel of high quality Colour: black (powder coating) Mounting symbol: JTR1478 JTR478 SUNR1-3356 The 65 T sprocket is perfect for those who ride mainly on squares and smaller spots. It lets the rider to easily slow down the bike enough to be able to perform all tricks while stunt riding. The maximum speed will drop significantly, but at this point – it doesn’t matter. You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 
  • Steel sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 70 Chain type: 520 Outer diameter: 363 mm Material: Abrasion-resistant steel of high quality Colour: black (powder coating) Mounting symbol: JTR1478 JTR478 SUNR1-3356 You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 100cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 100 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • We offer the service of rebuilding your tank (fuel tank) into one that will work better when driving on a wheel. Modification: - profiling the shape of the tank and welding the sheet together with reinforcements inside - welding the fuel cap in the upper part of the tank and modifying the vent - painting the tank in black gloss - gluing the upper part with a non-slip mat and strengthening the edges with glue. Time: 2-3 weeks How to do it? Before purchasing, please contact us by email: dixerparts@gmail.com We will set the dates and you can send your tank to us. Remember to thoroughly remove the fuel from it. We will send you the shipping address by email. Due to many different shades, we paint black, the color of the mat is also black.
  • Aluminum sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 55 Chain type: 520 Material: 7075 T6 aluminum alloy (PA9) Colour: silver Mounting symbol: JTR1478 JTR478 SUNR1-3356 You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 
  • Aluminum sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 70 Chain type: 520 Material: 7075 T6 aluminum alloy (PA9) Colour: silver Mounting symbol: JTR1478 JTR478 SUNR1-3356 You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 
  • Aluminum sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 50 Chain type: 520 Material: 7075 T6 aluminum alloy (PA9) Colour: silver Mounting symbol: JTR1478 JTR478 SUNR1-3356 You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 
  • Aluminum sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 60 Chain type: 520 Material: 7075 T6 aluminum alloy (PA9) Colour: silver Mounting symbol: JTR1478 JTR478 SUNR1-3356 You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 
  • Aluminum sprocket suitable for Kawasaki motorcycles (full list of models available below) Number of teeth: 65 Chain type: 520 Material: 7075 T6 aluminum alloy (PA9) Colour: silver Mounting symbol: JTR1478 JTR478 SUNR1-3356 You are also able to order a DID chain of any length and size, which can be adapted individually to your motorcycle. Message us or choose one of the sprockets available in our range, with 50, 55, 60, 65 or 70 teeth. If you haven't found the sprocket you were looking for in our store - contact us. 

Title