fbpx
  • Stunt clutch lever with a bearing Colour: black (anodised) Handlebar diameter: 22mm Model: with a bearing Option: three cable fixing positions The clutch levers are made of a 6061 aluminum, using the CNC milling technology. The use of a bearing improves the precision of clutch operation and extends the service life. The whole set is very solid and impact-resistant. The levers are prepared for use with one or two fingers. Additional anodisation increases resistance to corrosion and improves aesthetic values.
  • The universal brake fluid reservoir is the perfect complement to modifying your motorcycle. Tank fits: - to most of our top tree - for our front sets produced for the BMW K-series Made of plastic, anti-corrosion ensures long-term use. Modern, aesthetic appearance goes hand in hand with tightness and the possibility of mounting in many places. The price is for one piece.
  • A new radial master cylinder for MAGURA road motorcycles, HC1 model. This is the best pump for handbrake (stunt) systems using our single caliper mounts. We highly recommend it for kits intended for KTM, Husqvarna, Husaberg. The pump works very well with one radial four-piston caliper, which are most often mounted as an additional caliper in HB systems. Description: - black colour - pump piston 13mm - long lever - fluid reservoir included - very easy to install - for DOT brake fluid - STOP sensor Item No. 2100489 We recommend completing the entire system: pump 200 cm cable fixing clamp 300 mm shield.
  • Accessory exhaust kit ready to fit on all BMW K100 and K1100 models. The kit includes: - exhaust - db killer - 4in1 collector - spring Dimensions: Exhaust length (without 4in1): 43 cm Outer diameter of the 4in1 outlet: 50.8 mm 4in1 connector length: 185mm Exhaust prepared for installation with our rearsets: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - dual (DP5028 and DP5031) thanks to use of exhaust mounts available in our store (DP9080) The muffler is made of stainless steel and gives the bike a very nice look. The angle is adjusted to the line of the fuel tank, thanks to which it presents very well. Db-killer can be freely modified by drilling more holes, which will make the exhaust louder. We recommend installing the Db-killer before the periodic technical inspection :) The exhaust dont have TUV certified. Before installing, loosen the collectors bolts at the engine head. In the K100 models from the years (82-89) it is enough to unscrew the serial exhaust, in the K100RS 16V models after 1989 and K1100 the exhaust should be cut at the height of the side stand mounting (see photo). After installing the 4in1 adapter, tighten the screws of the collectors.
  • Clutch lever extension on the engine. Note! Before buying, please make sure that there is a place and the possibility of installing the lever. If the standard mount is directed towards the engine and there is no place for extending the lever without bending it, please think carefully about the purchase. The assembly of the lever allows the clutch to be operated more easily. The lever arm becomes longer, i.e. the force that needs to be used for the clutch to work is smaller. Our adapter is a very good option when the assembly of the clutch handle with easy pull and the easy pull does not help. To install the lever, one hole must be drilled in the standard clutch arm. Material: steel Black colour The motorcycle model that this product most often finds is the Honda CBR 600 F4 / F4i / FS Sport (1999-2007).
  • A straight handlebar made by Accel. Diameter (in place of mounting for risers) - 28,6mm Diameter (in place of the grips) - 22mm Material: Aluminum All accessories for enduro and cross motorcycles manufactured under the Accel brand are products of high quality and good design. They improve the work of many elements of a motorcycle giving it an attractive appearance. Accel motorcycle accessories are wear-resistant and well suited to your bike. Application: stunt riding, cafe racer, scrambler, fmx, hard enduro Highly recommended product!
  • Exhaust mounting (DP9078) prepared for all BMW K100 and K1100 models The mount works with our sets: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - dual (DP5028 and DP5031) The kit includes: - exhaust mount - spacer sleeve - a set of screws The mount is made of PA6 / PA9 aluminum alloy and it connects our products in a very nice way: sets and exhaust. Thanks to this, it is possible to quickly install custom components without thinking about how to put them together.
  • A new radial master cylinder for MAGURA road motorcycles, HC1 model. This is the best pump for handbrake (stunt) systems using our two caliper mounts. We highly recommend it for kits intended for Kawasaki, Honda, Suzuki and Yamaha. The pump works very well with two radial four-piston caliper, which are most often mounted as an additional caliper in HB systems. Description: - black colour - pump piston 16mm - long lever - fluid reservoir included - very easy to install - for DOT brake fluid - STOP sensor Item No. 2100457 We recommend completing the entire system: pump 200 cm cable fixing clamp 300 mm shield.
  • 4-in-1 collector pass-through ready to install on all BMW K100 and K1100 models The kit includes: - 4in1 collector - spring The 4in1 transition fits perfectly with the exhaust (DP9076). Dimensions: - outer diameter of the outlet: 50.8 mm - overall length: 185 mm It is made of stainless steel and gives the bike a very nice look. Before installing, loosen the collector bolts at the engine head. In the K100 models from the years (82-89) it is enough to unscrew the serial exhaust, in the K100RS 16V models after 1989 and K1100 the exhaust should be cut at the height of the side stand mounting (see photo). After installing the 4in1 adapter, tighten the screws of the collectors.
  • Universal bracket of brake reservoirs. Material: stainless steel Fixing: M6 bolt The mount solved a lot of our problems with the symmetrical positioning of the brake reservoirs. When mounted to the handlebar/master cylinder or clutch, you can position the tank as you like it best. Who are these bracket for? - Stunt - the ability to hide the tank below the handlebar so as not to get caught during tricks. - Cafe Racer - a minimalist look is a great solution when building beautiful motorcycles.
  • Brak w magazynie
    A handlebar made by Magura. Diameter (in place of mounting for risers) - 28,6mm Diameter (in place of the grips) - 22mm Material: Aluminum -Patented production process -High strength aluminum -Gentle on the joints due to the ergonomic shape -Longer service life due to shot-peened finish -TÜV-geprüft und mit Gutachten All accessories for enduro and cross motorcycles manufactured under the Magura brand are products of high quality and good design. They improve the work of many elements of a motorcycle giving it an attractive appearance. Magura motorcycle accessories are wear-resistant and well suited to your bike. Application: stunt riding, cafe racer, scrambler, fmx, hard enduro Highly recommended product!
  • A set of pegs for one axle on your motorcycle. Pegs are prepared to be mounted on a threaded rod M10 x 1.25 (standard size). The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg. Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 10 mm - you will not mount these pegs. Set contains: - 2x aluminum peg with plastic end Overall length: 80mm Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident. We also offer pegs mounted on an M8 threaded rod (for smaller holes in the axis).
  • Upper triple tree clamp for the BMW K-series motorcycles. Made with a CNC technology from a 20mm PA6 aluminum alloy. Anodized in black colour. The yoke is ready to be mounted with the stock suspension (replaces the original top triple). Prepared to mount the Motogadget Motoscope PRO counter. You can find a whole range of Motogadget parts in our store. Recommended product!
  •   Accessory manifolds ready to be installed in all BMW K100 and K1100 models. Perfectly matched to our 4-in-1 adapter (DP9079), which can be found in our store. Together with the muffler, driver / passenger sets and exhaust mount for our sets, they make a great set ready to put on. The kit includes: - 4x collector - 4x pressure flange Check out our sets prepared for K100 /K1100: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - double (DP5028 and DP5031) and exhaust mounts available in our store (DP9080) The exhaust is made of stainless steel and gives the motorcycle a very nice look.
  • Rear seat fairing for custom cafe racers.  We are able to produce fairings of any dimensions (also internal dimensions - to hide e.g. the battery). Material: ABS Ready to paint. The price includes: - rear seat fairing according to the given dimensions, - LED lamp We can help you to determine the dimensions of the fairing and the battery.
  • Very small switches prepared for mounting on a 22 mm handlebar. We recommend running the cables inside the handlebar, but it is also possible to arrange them along the handlebar. M3 mounting screws included. The switches work very well with the Motogadget M.unit control unit. They are very small, so we can get a very minimalist effect. The price includes one switch together with two buttons and two screws. Switch material is Ultrat.
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 50 cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 50 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 33 cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 33 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • A set of pegs for one axle on your motorcycle. Pegs are prepared to be mounted on a threaded rod M8 (standard size). The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg. Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 8 mm - you will not mount these pegs. Set contains: - 2x aluminum peg with plastic end Overall length: 80mm Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident. We also offer pegs mounted on an M10 threaded rod (for smaller holes in the axis).
  • Top quality brake fluid hose. You can feel free to use it to connect the brake fluid reservoir and the brake master cylinder. The hose does not sweat, the fluid does not condense on it and the brake does not become clogged with air after a few weeks... What more could you want? Length: 100cm Colour: Black Diameter (inner x outer): 7 x 12 mm. Included: - 1x hose 100 cm Other lengths available in our offer. Adapted to work with fluids: DOT 4 and DOT 5.1. Not suitable for silicone liquids.
  • Brak w magazynie
    Used to provide a neutral gear indication on any new speedometer. The K Neutral uses the 3 gear switches found on BMW K motorcycles. The module has with a power output for both the neutral indicator LED and the starter relay. It therefore also allows using the starter relay (start the bike) without the need to pull the clutch. - Dimensions: 38 mm length x 16 mm wide x 11 mm height - Body material: shock resistant ABS plastic, waterproof poured raisin - Power consumption: approx. 20 mA - Case Color: Black - Connections: 0.14 qmm and 0,5 qmm, 20 cm - Maximum ambient temperature: 80 degree Celsius - Input voltage range: 6 - 18 Volt
  • We offer the service of rebuilding your tank (fuel tank) into one that will work better when driving on a wheel. Modification: - profiling the shape of the tank and welding the sheet together with reinforcements inside - welding the fuel cap in the upper part of the tank and modifying the vent - painting the tank in black gloss - gluing the upper part with a non-slip mat and strengthening the edges with glue. Time: 2-3 weeks How to do it? Before purchasing, please contact us by email: dixerparts@gmail.com We will set the dates and you can send your tank to us. Remember to thoroughly remove the fuel from it. We will send you the shipping address by email. Due to many different shades, we paint black, the color of the mat is also black.
  • YSS accessory rear shock absorber. Type: gas Upper mount: Eyelet Inner eyelet diameter: 12 mm Length: 380-390 mm Bottom mount: Eyelet Inner eyelet diameter: 12 mm Adjustment: spring back tension (stepless) Spring colour: Black Spring characteristics: 55 Spring length: 240 mm Spring diameter: 46 mm Manufacturer: YSS Piston diameter: 36 mm Bar diameter: 16 mm
  • Upper triple tree clamp for the BMW K-series motorcycles. Made with a CNC technology from a 20mm PA6 aluminum alloy. The yoke is ready to be mounted with the stock suspension (replaces the original top triple). Prepared to mount the Motogadget Motoscope PRO counter. You can find a whole range of Motogadget parts in our store. Recommended product!
  • Upper triple tree clamp for the BMW K-series motorcycles. Made with a CNC technology from a 20mm PA6 aluminum alloy. Colour: black The yoke is ready to be mounted with the stock suspension (replaces the original top triple). Ready to mount Motogadget MINI and leds Motogadget Motosign Mini (3003010 lub 3003030). Motogadget parts should be purchased separately in our store. Recommended product!
  • Upper triple tree clamp for the BMW K-series motorcycles. Made with a CNC technology from a 20mm PA6 aluminum alloy. The yoke is ready to be mounted with the stock suspension (replaces the original top triple). Recommended product!
  • Upper triple tree clamp for the BMW K-series motorcycles. Made with a CNC technology from a 20mm PA6 aluminum alloy. The yoke is ready to be mounted with the stock suspension (replaces the original top triple). Recommended product!
  • Upper triple tree clamp for the BMW K-series motorcycles. Made with a CNC technology from a 20mm PA6 aluminum alloy. The yoke is ready to be mounted with the stock suspension (replaces the original top triple). Set includes risers for a 22mm or 28,6mm handlebar.
  • Upper triple tree clamp for the BMW K-series motorcycles. Made with a CNC technology from a 20mm PA6 aluminum alloy. The yoke is ready to be mounted with the stock suspension (replaces the original top triple). Prepared to mount a 62mm diameter speedometer. Recommended product!
  • Accessory exhaust ready to fit on all BMW K100 and K1100 models. Perfectly suited to our 4in1 collector (DP9079), which can be found in our store. The kit includes: - exhaust - db killer Dimensions: Muffler length (without 4in1): 43 cm Exhaust prepared for installation with our rearsets: - short (DP5004 and DP5002) - long (DP5001 and DP5027) - dual (DP5028 and DP5031) thanks to use of exhaust mounts available in our store (DP9080) The muffler is made of stainless steel and gives the bike a very nice look. The angle is adjusted to the line of the fuel tank, thanks to which it presents very well. Db-killer can be freely modified by drilling more holes, which will make the exhaust louder. We recommend installing the Db-killer before the periodic technical inspection :) The exhaust dont have TUV certified.

Title